PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5800332-1500-004
5800332-1500-004 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include hole_diameter: 0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN, outside_diameter: 0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN, style_designator: FLAT INTERNAL TEETH, surface_treatment: CADMIUM OR ZINC OVERALL, material_thickness: 0.022 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-558-4187, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-1500-004
NSN: 5310-00-558-4187
FSC: 5310
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
hole_diameter0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
outside_diameter0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
style_designatorFLAT INTERNAL TEETH
surface_treatmentCADMIUM OR ZINC OVERALL
material_thickness0.022 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 1,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-C-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5310-00-558-4187
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5800332-1500-004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: FLAT INTERNAL TEETH
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 1,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-C-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.383 INCHES MINIMUM AND 0.398 INCHES MAXIMUM IN
STYLE DESIGNATORFLAT INTERNAL TEETH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 1,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-C-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
OUTSIDE DIAMETER0.493 INCHES MINIMUM AND 0.507 INCHES MAXIMUM IN
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
905212-02Interchangeable
interchangeable cross-reference
interchangeable
5310PL1368579Interchangeable
interchangeable cross-reference
interchangeable
S1442Interchangeable
interchangeable cross-reference
interchangeable
905044Interchangeable
interchangeable cross-reference
interchangeable
NL5439-332-0Interchangeable
interchangeable cross-reference
interchangeable
1225774Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5800332-1500-004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-1500-004?
5800332-1500-004 is a WASHER,LOCK.
What parts can replace 5800332-1500-004?
There are 28 known substitutes for 5800332-1500-004: 905212-02, 5310PL1368579, S1442 and 25 more. Substitute compatibility should be verified for your specific system.
Is 5800332-1500-004 still available?
5800332-1500-004 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-1500-004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026