PartsTable
Technical Data Sheet
Download PDF

5800332-1500-003 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

5800332-1500-003: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, nut_style: SLEEVE, nut_length: 0.407 INCHES NOMINAL IN, nut_diameter: 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-877-1096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5800332-1500-003
NSN: 5310-00-877-1096
FSC: 5310 — Nuts and Washers
CAGE: C0426 — HENSOLDT SENSORS GMBH (DEU)
SPECIFICATIONS
materialPLASTIC OVERALL
nut_styleSLEEVE
nut_length0.407 INCHES NOMINAL IN
nut_diameter0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
flange_thickness0.093 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.312 INCHES IN
cross-sectional_shapeROUND FLANGE
thread_quantity_per_inch24
flange_width_across_flats0.438 INCHES NOMINAL IN
NSN5310-00-877-1096
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5800332-1500-003 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
NUT LENGTH: 0.407 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.093 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT DIAMETER: 0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: ROUND FLANGE
TECHNICAL CHARACTERISTICS
FLANGE WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
NUT LENGTH0.407 INCHES NOMINAL IN
FLANGE THICKNESS0.093 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT DIAMETER0.372 INCHES MINIMUM AND 0.374 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND FLANGE
CROSS-SECTIONAL SHAPEHEXAGONAL NUT
NUT STYLESLEEVE
SUBSTITUTES & CROSS-REFERENCES 1
751002Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5800332-1500-003?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5800332-1500-003?
5800332-1500-003 is a NUT,SLEEVE.
What parts can replace 5800332-1500-003?
There is 1 known substitute for 5800332-1500-003: 751002. Substitute compatibility should be verified for your specific system.
What is the NSN for 5800332-1500-003?
5800332-1500-003 is cataloged in the U.S. Government catalog under NSN 5310-00-877-1096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5800332-1500-003

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.