PartsTable
Technical Data Sheet
PartsTable / MRO / 580004
580004 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: STEEL COMP 303 OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.240 INCHES MAXIMUM IN, body_diameter: 0.160 INCHES NOMINAL IN, surface_finish: 125.0 MICROINCHES OVERALL, first_end_style: SQUARE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-056-2434, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 580004
NSN: 5315-00-056-2434
FSC: 5315
CAGE: 82328 — DRESSER RAND CO TERRY CORP STEAM TURBINE MOTOR AND GENERATOR CO A JOINT VENTURE (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.240 INCHES MAXIMUM IN
body_diameter0.160 INCHES NOMINAL IN
surface_finish125.0 MICROINCHES OVERALL
first_end_styleSQUARE
terminal_length1.500 INCHES MINIMUM IN
special_featuresWEAPON SYSTEM ESSENTIAL
surface_treatmentPASSIVATE OVERALL
terminal_diameter0.028 INCHES NOMINAL IN
pin_overall_length0.750 INCHES NOMINAL IN
fsc_application_dataPRIMER FUEL FILTER
NSN5315-00-056-2434
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 580004 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.750 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE FINISH: 125.0 MICROINCHES OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
PIN OVERALL DIAMETER: 0.0930 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 303 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.750 INCHES NOMINAL IN
FIRST END STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE FINISH125.0 MICROINCHES OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
PIN OVERALL DIAMETER0.0930 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
MATERIALSTEEL COMP 303 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
15-123Interchangeable
interchangeable cross-reference
interchangeable
QC8-2P0RM5PCTInterchangeable
interchangeable cross-reference
interchangeable
80785-1Interchangeable
interchangeable cross-reference
interchangeable
8698670Interchangeable
interchangeable cross-reference
interchangeable
580004Interchangeable
interchangeable cross-reference
interchangeable
N53A-2540Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 580004?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 580004?
580004 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 580004?
There are 6 known substitutes for 580004: 15-123, QC8-2P0RM5PCT, 80785-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 580004?
580004 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-056-2434. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 580004

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026