PartsTable
Technical Data Sheet
Download PDF

580-8 — SOLENOID,ELECTRICAL

✓ Government record, cited
Sylvanian Families · ORING SEAL
PRODUCT OVERVIEW

580-8: SOLENOID,ELECTRICAL.

The SOLENOID,ELECTRICAL is a Sylvanian Families industrial component. Key specifications include shape: RECTANGULAR STRIKE, width: 0.75 INCHES NOMINAL STRIKE IN, length: 8.0 INCHES NOMINAL STRIKE IN, material: STEEL CORROSION RESISTING OVERALL, duty_type: CONTINUOUS, body_style: CYLINDRICAL FRAME. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-171-7832, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
580-8
NSN: 5330-00-171-7832
NIINs: 001717832, 008852266, 011624321, 015449647, 016242051, 016866573
FSC: 5330 — Packing and Gasket Materials
CAGE: 76680 — FEDERAL-MOGUL CORP CHASSIS PRODUCTS DIV (USA)
SPECIFICATIONS
shapeRECTANGULAR STRIKE
width0.75 INCHES NOMINAL STRIKE IN
length8.0 INCHES NOMINAL STRIKE IN
materialSTEEL CORROSION RESISTING OVERALL
duty_typeCONTINUOUS
body_styleCYLINDRICAL FRAME
case_styleSQUARE
seal_width0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
body_length1.188 INCHES MAXIMUM IN
current_rating1.0 AMPERES NOMINAL
inclosure_typeFULLY INCLOSED
actuator_length0.463 INCHES NOMINAL IN
NSN5330-00-171-7832
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 580-8 MFR: Sylvanian Families ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 2.686 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.562 INCHES NOMINAL IN
•
MATERIAL: LEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER2.686 INCHES NOMINAL IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.562 INCHES NOMINAL IN
MATERIALLEATHER AND RUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
SUBSTITUTES & CROSS-REFERENCES 3
481190A2Reference document
Same NSN cross-reference
Reference document — Secondary reference
B545-3BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5796Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 580-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 580-8?
580-8 is a SOLENOID,ELECTRICAL manufactured by Sylvanian Families.
What parts can replace 580-8?
There are 3 known substitutes for 580-8: 481190A2, B545-3B, 5796. Substitute compatibility should be verified for your specific system.
What is the NSN for 580-8?
580-8 is cataloged in the U.S. Government catalog under NSN 5330-00-171-7832. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 580-8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.