PartsTable
Technical Data Sheet
Download PDF

580-530-014 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

580-530-014: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include end_radius: 0.312 INCHES NOMINAL IN, fork_depth: 0.500 INCHES NOMINAL IN, hole_shape: SLOTTED, slot_width: 0.266 INCHES NOMINAL IN, slot_length: 0.446 INCHES NOMINAL IN, shank_length: 1.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-444-4885, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
580-530-014
NSN: 5340-01-444-4885
FSC: 5340 — Hardware, Commercial
CAGE: 06970 — CABLECRAFT MOTION CONTROLS LLC (USA)
SPECIFICATIONS
end_radius0.312 INCHES NOMINAL IN
fork_depth0.500 INCHES NOMINAL IN
hole_shapeSLOTTED
slot_width0.266 INCHES NOMINAL IN
slot_length0.446 INCHES NOMINAL IN
shank_length1.000 INCHES NOMINAL IN
thread_class3B SHANK
overall_width0.500 INCHES NOMINAL IN
thread_length0.750 INCHES MINIMUM SHANK IN
overall_height0.625 INCHES NOMINAL IN
shank_diameter0.625 INCHES NOMINAL IN
fork_span_width0.280 INCHES NOMINAL IN
NSN5340-01-444-4885
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 580-530-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.625 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.280 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.110 INCHES NOMINAL IN
•
END RADIUS: 0.312 INCHES NOMINAL IN
•
THREAD LENGTH: 0.750 INCHES MINIMUM SHANK IN
•
SHANK LENGTH: 1.000 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.625 INCHES NOMINAL IN
OVERALL HEIGHT0.625 INCHES NOMINAL IN
FORK SPAN WIDTH0.280 INCHES NOMINAL IN
FORK ARM THICKNESS0.110 INCHES NOMINAL IN
END RADIUS0.312 INCHES NOMINAL IN
THREAD LENGTH0.750 INCHES MINIMUM SHANK IN
SHANK LENGTH1.000 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND SHANK
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
LE161-0023-0014Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 580-530-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 580-530-014?
580-530-014 is a CLEVIS,ROD END.
What parts can replace 580-530-014?
There is 1 known substitute for 580-530-014: LE161-0023-0014. Substitute compatibility should be verified for your specific system.
What is the NSN for 580-530-014?
580-530-014 is cataloged in the U.S. Government catalog under NSN 5340-01-444-4885. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 580-530-014

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.