PartsTable
Technical Data Sheet
Download PDF

58-413-6 — STRIP,ELECTRICAL GROUNDING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

58-413-6: STRIP,ELECTRICAL GROUNDING.

The STRIP,ELECTRICAL GROUNDING is a the manufacturer industrial component. Key specifications include length: 2.486 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN, groove_width: 0.060 INCHES NOMINAL IN, groove_diameter: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, shoulder_length: 0.010 INCHES NOMINAL IN, special_features: 100 HP COMMERCIAL OUTBOARD ENGINE, FOUR MODEL E100-WPLSIF, E100-WPXSIF, J100-WPLSIF OR J100-WPXSIF, style_designator: LEFT INTERNAL AND RIGHT EXTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-491-9891, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
58-413-6
NSN: 5340-00-491-9891
NIINs: 004919891, 014887607
FSC: 5340 — Hardware, Commercial
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
length2.486 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
groove_width0.060 INCHES NOMINAL IN
groove_diameter0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
shoulder_length0.010 INCHES NOMINAL IN
special_features100 HP COMMERCIAL OUTBOARD ENGINE, FOUR MODEL E100-WPLSIF, E100-WPXSIF, J100-WPLSIF OR J100-WPXSIF
style_designatorLEFT INTERNAL AND RIGHT EXTERNAL THREAD
shoulder_diameter0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
width_across_flats0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
cross-sectional_shapeHEXAGON
NSN5340-00-491-9891
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 58-413-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
•
LENGTH: 2.486 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
•
GROOVE DIAMETER: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT EXTERNAL THREAD
•
CROSS-SECTIONAL SHAPE: HEXAGON
•
SHOULDER DIAMETER: 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
SHOULDER LENGTH: 0.010 INCHES NOMINAL IN
•
GROOVE WIDTH: 0.060 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM IN
LENGTH2.486 INCHES MINIMUM AND 2.490 INCHES MAXIMUM IN
GROOVE DIAMETER0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT EXTERNAL THREAD
CROSS-SECTIONAL SHAPEHEXAGON
SHOULDER DIAMETER0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
SHOULDER LENGTH0.010 INCHES NOMINAL IN
GROOVE WIDTH0.060 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1771167-6Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 58-413-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 58-413-6?
58-413-6 is a STRIP,ELECTRICAL GROUNDING.
What parts can replace 58-413-6?
There is 1 known substitute for 58-413-6: 1771167-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 58-413-6?
58-413-6 is cataloged in the U.S. Government catalog under NSN 5340-00-491-9891. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 58-413-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.