PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 57A5A182-14
57A5A182-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.200 INCHES NOMINAL IN, material: PLASTIC POLYHEXAMETHYLENE AMIDE BAND, overall_width: 0.500 INCHES NOMINAL IN, special_features: HAS ALTERNATE HOLE IN BOTTOM TONGUE SPACED 0.312 IN. FROM CENTER OF REGULAR MTG HOLE IN, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-6732, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
57A5A182-14
NSN: 5340-00-664-6732
FSC: 5340
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
diameter0.200 INCHES NOMINAL IN
materialPLASTIC POLYHEXAMETHYLENE AMIDE BAND
overall_width0.500 INCHES NOMINAL IN
special_featuresHAS ALTERNATE HOLE IN BOTTOM TONGUE SPACED 0.312 IN. FROM CENTER OF REGULAR MTG HOLE IN
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.070 INCHES NOMINAL IN
loop_inside_diameter0.840 INCHES NOMINAL IN
material_document_and_classificationMIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end0.910 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.760 INCHES NOMINAL IN
NSN5340-00-664-6732
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 57A5A182-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE AMIDE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
STYLE DESIGNATOR: SINGLE LOOP
•
DIAMETER: 0.200 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.910 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.070 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE AMIDE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE BAND
STYLE DESIGNATORSINGLE LOOP
DIAMETER0.200 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.910 INCHES NOMINAL IN
SPECIAL FEATURESHAS ALTERNATE HOLE IN BOTTOM TONGUE SPACED 0.312 IN. FROM CENTER OF REGULAR MTG HOLE IN
MATERIAL THICKNESS0.070 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.760 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
30AC2 1-8Interchangeable
interchangeable cross-reference
interchangeable
S3113Interchangeable
interchangeable cross-reference
interchangeable
801E5439Interchangeable
interchangeable cross-reference
interchangeable
3100-0214Interchangeable
interchangeable cross-reference
interchangeable
310-282XInterchangeable
interchangeable cross-reference
interchangeable
A12-717Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57A5A182-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57A5A182-14?
57A5A182-14 is a CLAMP,LOOP.
What parts can replace 57A5A182-14?
There are 15 known substitutes for 57A5A182-14: 30AC2 1-8, S3113, 801E5439 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 57A5A182-14?
57A5A182-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-6732. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57A5A182-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026