PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 57962
57962 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: ASBESTOS OVERALL, hole_diameter: 0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 4.125 INCHES NOMINAL IN, overall_length: 4.125 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 2.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-298-8651, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
57962
NSN: 5330-00-298-8651
FSC: 5330
CAGE: 80072 — H20 TANK INC U S MOTORS DIV (USA)
SPECIFICATIONS
materialASBESTOS OVERALL
hole_diameter0.469 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width4.125 INCHES NOMINAL IN
overall_length4.125 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter2.750 INCHES NOMINAL IN
bolt_hole_quantity4
lubrication_methodIMPREGNATED
lubrication_materialGRAPHITE OVERALL
outside_corner_radius0.938 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_width0.625 INCHES NOMINAL IN
NSN5330-00-298-8651
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 57962 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
APERTURE DIAMETER: 2.750 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL WIDTH4.125 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.875 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
APERTURE DIAMETER2.750 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
OVERALL LENGTH4.125 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
LUBRICATION MATERIALGRAPHITE OVERALL
LUBRICATION METHODIMPREGNATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
XH-4002Interchangeable
interchangeable cross-reference
interchangeable
57962Interchangeable
interchangeable cross-reference
interchangeable
1196Interchangeable
interchangeable cross-reference
interchangeable
55-1000-29Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57962?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57962?
57962 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E.
What parts can replace 57962?
There are 4 known substitutes for 57962: XH-4002, 57962, 1196 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 57962?
57962 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-298-8651. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57962

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026