PartsTable
Technical Data Sheet
Download PDF

5793430-1 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5793430-1: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 2.410 INCHES NOMINAL IN, special_features: MATERIAL PER QQ-S-766, CLASS 316, CONDITION A; PASSIVATE PER QQ-P-35, TYPE II, style_designator: HALF ARCH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-518-7285, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5793430-1
NSN: 5340-01-518-7285
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width1.000 INCHES NOMINAL IN
overall_length2.410 INCHES NOMINAL IN
special_featuresMATERIAL PER QQ-S-766, CLASS 316, CONDITION A; PASSIVATE PER QQ-P-35, TYPE II
style_designatorHALF ARCH
surface_treatmentPASSIVATE
material_thickness0.090 INCHES NOMINAL IN
mounting_hole_size0.330 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
inside_diameter/arch_length1.320 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.000 INCHES NOMINAL IN
distance_between_mounting_hole_center_and_inside_edge_of_arch0.050 INCHES NOMINAL IN
NSN5340-01-518-7285
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5793430-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.330 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
•
MOUNTING PAD: NOT INCLUDED
•
STYLE DESIGNATOR: HALF ARCH
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 1.000 INCHES NOMINAL IN
•
DISTANCE BETWEEN MOUNTING HOLE CENTER AND INSIDE EDGE OF ARCH: 0.050 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.330 INCHES MINIMUM AND 0.337 INCHES MAXIMUM IN
MOUNTING PADNOT INCLUDED
STYLE DESIGNATORHALF ARCH
OVERALL LENGTH2.410 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.000 INCHES NOMINAL IN
DISTANCE BETWEEN MOUNTING HOLE CENTER AND INSIDE EDGE OF ARCH0.050 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL PER QQ-S-766, CLASS 316, CONDITION A; PASSIVATE PER QQ-P-35, TYPE II
SURFACE TREATMENTPASSIVATE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5793430-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5793430-1?
5793430-1 is a STRAP,RETAINING.
What is the NSN for 5793430-1?
5793430-1 is cataloged in the U.S. Government catalog under NSN 5340-01-518-7285. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5793430-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.