PartsTable
Technical Data Sheet
5793276 FIND 71 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,ANTIPILFERAGE is a the manufacturer industrial component. Key specifications include shape: ROUND WITH FLATTED SIDE(S), height: 0.765 INCHES NOMINAL IN, length: 9.000 INCHES NOMINAL IN, material: PLASTIC POLYPROPYLENE, cord_length: 7.500 INCHES NOMINAL IN, special_features: TAG ON SEAL (.765"X1.5") WITH OVER 20 LOCKING POSITIONS IN .125" INCREMENTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-518-7848, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5793276 FIND 71
NSN: 5340-01-518-7848
FSC: 5340
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
shapeROUND WITH FLATTED SIDE(S)
height0.765 INCHES NOMINAL IN
length9.000 INCHES NOMINAL IN
materialPLASTIC POLYPROPYLENE
cord_length7.500 INCHES NOMINAL IN
hole_quantity1
special_featuresTAG ON SEAL (.765"X1.5") WITH OVER 20 LOCKING POSITIONS IN .125" INCREMENTS
end_item_identificationCIRCUIT SYMBOL, STRESS
NSN5340-01-518-7848
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5793276 FIND 71 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
HOLE QUANTITY: 1
MATERIAL: PLASTIC POLYPROPYLENE
LENGTH: 9.000 INCHES NOMINAL IN
HEIGHT: 0.765 INCHES NOMINAL IN
CORD LENGTH: 7.500 INCHES NOMINAL IN
SHAPE: ROUND WITH FLATTED SIDE(S)
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTAG ON SEAL (.765"X1.5") WITH OVER 20 LOCKING POSITIONS IN .125" INCREMENTS
HOLE QUANTITY1
MATERIALPLASTIC POLYPROPYLENE
LENGTH9.000 INCHES NOMINAL IN
HEIGHT0.765 INCHES NOMINAL IN
CORD LENGTH7.500 INCHES NOMINAL IN
SHAPEROUND WITH FLATTED SIDE(S)
END ITEM IDENTIFICATIONCIRCUIT SYMBOL, STRESS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
565598Interchangeable
interchangeable cross-reference
interchangeable
663000Interchangeable
interchangeable cross-reference
interchangeable
16296Interchangeable
interchangeable cross-reference
interchangeable
6630Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5793276 FIND 71?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5793276 FIND 71?
5793276 FIND 71 is a SEAL,ANTIPILFERAGE.
What parts can replace 5793276 FIND 71?
There are 4 known substitutes for 5793276 FIND 71: 565598, 663000, 16296 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5793276 FIND 71?
5793276 FIND 71 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-518-7848. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5793276 FIND 71