PartsTable
Technical Data Sheet
Download PDF

5793265 FIND 172 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5793265 FIND 172: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: TITANIUM ALLOY, length_under_shoulder: 1.540 INCHES NOMINAL IN, open_end_inside_diameter: 0.676 INCHES NOMINAL IN, closed_end_overall_diameter: 1.110 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-502-0029, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5793265 FIND 172
NSN: 5340-01-502-0029
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
special_featuresITEM HAS HEX HEAD MEASURING 1.500 IN ACROSS THE FLATS; CONTROLLING AGENCY NAME IS "REFRIGERANT SERVICE PORT CAP"; ITEM IS HELD INTO PLACE BY WELD SPOTS IN
length_under_shoulder1.540 INCHES NOMINAL IN
open_end_inside_diameter0.676 INCHES NOMINAL IN
closed_end_overall_diameter1.110 INCHES NOMINAL IN
NSN5340-01-502-0029
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5793265 FIND 172 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 1.110 INCHES NOMINAL IN
•
LENGTH UNDER SHOULDER: 1.540 INCHES NOMINAL IN
•
OPEN END INSIDE DIAMETER: 0.676 INCHES NOMINAL IN
•
MATERIAL: TITANIUM ALLOY
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER1.110 INCHES NOMINAL IN
LENGTH UNDER SHOULDER1.540 INCHES NOMINAL IN
SPECIAL FEATURESITEM HAS HEX HEAD MEASURING 1.500 IN ACROSS THE FLATS; CONTROLLING AGENCY NAME IS "REFRIGERANT SERVICE PORT CAP"; ITEM IS HELD INTO PLACE BY WELD SPOTS IN
OPEN END INSIDE DIAMETER0.676 INCHES NOMINAL IN
MATERIALTITANIUM ALLOY
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
7326446Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5793265 FIND 172?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5793265 FIND 172?
5793265 FIND 172 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What parts can replace 5793265 FIND 172?
There is 1 known substitute for 5793265 FIND 172: 7326446. Substitute compatibility should be verified for your specific system.
What is the NSN for 5793265 FIND 172?
5793265 FIND 172 is cataloged in the U.S. Government catalog under NSN 5340-01-502-0029. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5793265 FIND 172