PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 578-2200-1573026REVAPC40

578-2200-1573026REVAPC40 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include bore_diameter: 0.6250 INCHES NOMINAL IN, alignment_type: RIGID, overall_outside_diameter: 0.8120 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-112-5887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
578-2200-1573026REVAPC40
NSN: 3110-00-112-5887
FSC: 3110
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
bore_diameter0.6250 INCHES NOMINAL IN
alignment_typeRIGID
overall_outside_diameter0.8120 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-112-5887
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 578-2200-1573026REVAPC40 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ALIGNMENT TYPE: RIGID
•
OVERALL OUTSIDE DIAMETER: 0.8120 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
•
BORE DIAMETER: 0.6250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
ALIGNMENT TYPERIGID
OVERALL OUTSIDE DIAMETER0.8120 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
20300-80InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8400-4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
20100-80InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GB-108-OHInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GB-108InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1557048InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 578-2200-1573026REVAPC40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 578-2200-1573026REVAPC40?
578-2200-1573026REVAPC40 is a BEARING,ROLLER,NEEDLE.
What parts can replace 578-2200-1573026REVAPC40?
There are 12 known substitutes for 578-2200-1573026REVAPC40: 20300-80, 8400-4, 20100-80 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 578-2200-1573026REVAPC40?
578-2200-1573026REVAPC40 is cataloged in the Federal Logistics Information System under NSN 3110-00-112-5887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 578-2200-1573026REVAPC40

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026