PartsTable
Technical Data Sheet
Download PDF

576624 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

576624: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, end_radius: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, fork_depth: 0.640 INCHES NOMINAL IN, shank_length: 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_class: 3A ROD CONNECTION A, hole_diameter: 0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-929-9844, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
576624
NSN: 5340-00-929-9844
FSC: 5340 — Hardware, Commercial
CAGE: 77445 — RTX CORPORATION DBA PRATT & WHITNEY DIV PRATT &WHITNEY (USA)
SPECIFICATIONS
materialNICKEL ALLOY OVERALL
end_radius0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
fork_depth0.640 INCHES NOMINAL IN
shank_length0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_class3A ROD CONNECTION A
hole_diameter0.246 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_length0.640 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.315 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
fork_span_width0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
overall_diameter0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
NSN5340-00-929-9844
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 576624 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.315 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
•
END RADIUS: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.640 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.315 INCHES MINIMUM AND 0.317 INCHES MAXIMUM IN
FORK SPAN WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
FORK ARM THICKNESS0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
OVERALL DIAMETER0.790 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
END RADIUS0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
THREAD LENGTH0.640 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH0.730 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5754 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 576624?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 576624?
576624 is a CLEVIS,ROD END.
What is the NSN for 576624?
576624 is cataloged in the U.S. Government catalog under NSN 5340-00-929-9844. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 576624

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.