PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 57625
57625 ✓ Verified by PartsTable
FSP · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

FSP Champ is the high density version of double-conversion online UPS with an output power factor that reaches 0.9 and featured with ECO mode for energy saving.<br><br>FSP Champ is the high density version of double-conversion online UPS with a output power factor 0.9. It’s designed in small cabinet with microprocessor controller.<br><br>Champ also have USB and RS-232 communication ports as standard, with a built-in intelligent slot for additional adapters, protocol converters and relate contact cards. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-600-6642, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
57625
NSN: 3120-00-600-6642
FSC: 3120
CAGE: 02121 — GOODRICH AEROSPACE CANADA LTD (CAN)
SPECIFICATIONS
materialMAGNESIUM AND COPPER ALLOY
drive_typeHEX HEAD
design_typeTHREADED
overall_diameter4.350 INCHES NOMINAL IN
material_document_and_classificationALLOY 865 NATIONAL SPEC SINGLE MATERIAL RESPONSE
NSN3120-00-600-6642
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 57625 · FSP ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE
•
CORNER SHAPE: SQUARE LEFT FLANGE BODY CORNER
•
SURFACE FINISH: 125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
•
HOLE DIAMETER: 0.0620 INCHES NOMINAL FIRST IN
•
ANTIROTATION/LUBRICATION TYPE AND QUANTITY: 1 HOLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OUTSIDE DIAMETER SURFACE OF FLANGE
CORNER SHAPESQUARE LEFT FLANGE BODY CORNER
SURFACE TREATMENTCADMIUM RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF LEFT FLANGE
SURFACE FINISH32.0 MICROINCHES LEFT END SURFACE OF BODY AND FLANGE
HOLE DIAMETER0.0620 INCHES NOMINAL FIRST IN
ANTIROTATION/LUBRICATION TYPE AND QUANTITY1 HOLE
CORNER SHAPEROUND INSIDE LEFT CORNER
SURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
CORNER SHAPESQUARE INSIDE RIGHT CORNER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
PM12GSInterchangeable
interchangeable cross-reference
interchangeable
8C5PAXInterchangeable
interchangeable cross-reference
interchangeable
8A31PAInterchangeable
interchangeable cross-reference
interchangeable
5762Interchangeable
interchangeable cross-reference
interchangeable
MIL-E-1/824Interchangeable
interchangeable cross-reference
interchangeable
T8601330P95Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57625?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57625?
57625 is a BUSHING,SLEEVE manufactured by FSP.
What parts can replace 57625?
There are 18 known substitutes for 57625: PM12GS, 8C5PAX, 8A31PA and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 57625?
57625 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3120-00-600-6642. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57625

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026