PartsTable
Technical Data Sheet
PartsTable / MRO / 575D64-2
575D64-2 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

RESISTOR,VARIABLE,NONWIRE WOUND,. Key specifications include body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.734 INCHES NOMINAL IN, shaft_style: ROUND, SLOTTED, shaft_length: 0.875 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT, body_diameter: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-105-7564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 575D64-2
NSN: 5905-00-105-7564
FSC: 5905
CAGE: 94033 — CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV (USA)
SPECIFICATIONS
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.734 INCHES NOMINAL IN
shaft_styleROUND, SLOTTED
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter0.750 INCHES NOMINAL IN
shaft_diameter0.125 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
overall_diameter0.750 INCHES NOMINAL IN
section_quantity2
terminal_locationRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
device_design_typeERR-030 AT 9:00 OCLOCKUNABLE TO DECODE
NSN5905-00-105-7564
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,VARIABLE,NONWIRE WOUND, TITLE COMPONENT PN 575D64-2 MFR RESISTOR,VARIABLE,NONW
KEY FEATURES
•
SHAFT DIAMETER: 0.125 INCHES NOMINAL IN
•
DEVICE DESIGN TYPE: ERR-030 AT 9:00 OCLOCKUNABLE TO DECODE
•
RESISTANCE TOLERANCE PER SECTION IN PERCENT: -10.0 TO 10.0 ALL SECTIONS
•
POWER DISSIPATION RATING PER SECTION IN WATTS: 1.5 FREE AIR ALL SECTIONS
•
TERMINAL TYPE AND QUANTITY: 6 TAB, SOLDER LUG
•
TEST DATA DOCUMENT: 70117-575D64-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
•
TERMINAL LOCATION: RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
•
SCREW THREAD QUANTITY PER INCH: 32.0
TECHNICAL CHARACTERISTICS (FLIS)
SHAFT DIAMETER0.125 INCHES NOMINAL IN
DEVICE DESIGN TYPEERR-030 AT 9:00 OCLOCKUNABLE TO DECODE
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 ALL SECTIONS
POWER DISSIPATION RATING PER SECTION IN WATTS1.5 FREE AIR ALL SECTIONS
TERMINAL TYPE AND QUANTITY6 TAB, SOLDER LUG
TEST DATA DOCUMENT70117-575D64-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD DIAMETER0.250 INCHES NOMINAL IN
SCREW THREAD SERIES DESIGNATORUNEF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
1125-5000Interchangeable
interchangeable cross-reference
interchangeable
2551Interchangeable
interchangeable cross-reference
interchangeable
7520Interchangeable
interchangeable cross-reference
interchangeable
075200Interchangeable
interchangeable cross-reference
interchangeable
SWR1096-2Interchangeable
interchangeable cross-reference
interchangeable
AS-6AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 575D64-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 575D64-2?
575D64-2 is a RESISTOR,VARIABLE,NONWIRE WOUND,. It is classified as a MRO (MRO_GENERAL).
What parts can replace 575D64-2?
There are 15 known substitutes for 575D64-2: 1125-5000, 2551, 7520 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 575D64-2?
575D64-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5905-00-105-7564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 575D64-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026