PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 575A4
575A4 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: PLASTIC INSULATION, slot_depth: 0.093 INCHES SINGLE END IN, slot_width: 0.029 INCHES SINGLE END IN, swage_depth: 0.045 INCHES IN, largest_width: 0.094 INCHES SINGLE END IN, overall_height: 0.201 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-347-1865, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
575A4
NSN: 5330-00-347-1865
FSC: 5330
CAGE: 56442 — DIAMOND REO TRUCK CO (USA)
SPECIFICATIONS
materialPLASTIC INSULATION
slot_depth0.093 INCHES SINGLE END IN
slot_width0.029 INCHES SINGLE END IN
swage_depth0.045 INCHES IN
largest_width0.094 INCHES SINGLE END IN
overall_height0.201 INCHES IN
terminal_length0.156 INCHES IN
overall_diameter0.094 INCHES IN
basic_shape_styleTUBULAR, ROUND
precious_materialSILVER
surface_treatmentSILVER OVERALL SINGLE LAYER
thru-hole_diameter0.043 INCHES IN
NSN5330-00-347-1865
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 575A4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
227MR141P002Interchangeable
interchangeable cross-reference
interchangeable
5261-5Interchangeable
interchangeable cross-reference
interchangeable
745524-2Interchangeable
interchangeable cross-reference
interchangeable
988370-52Interchangeable
interchangeable cross-reference
interchangeable
50T1Interchangeable
interchangeable cross-reference
interchangeable
5075-A-6Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 575A4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 575A4?
575A4 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace 575A4?
There are 8 known substitutes for 575A4: 227MR141P002, 5261-5, 745524-2 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 575A4?
575A4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-347-1865. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 575A4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026