PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 575410
575410 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN, housing_bore_diameter: 5.751 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 4.312 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2751, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
575410
NSN: 5330-00-641-2751
FSC: 5330
CAGE: 80201 — SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT B
case_styleSQUARE
seal_width0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
housing_bore_diameter5.751 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter4.312 INCHES NOMINAL IN
NSN5330-00-641-2751
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 575410 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 4.312 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT B
•
CASE STYLE: SQUARE
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 5.751 INCHES NOMINAL IN
•
SEAL WIDTH: 0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER4.312 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT B
MATERIALLEATHER SEALING ELEMENT A
CASE STYLESQUARE
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER5.751 INCHES NOMINAL IN
MATERIALSTEEL CASE
SEAL WIDTH0.531 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
NDC00009-0315-09Interchangeable
interchangeable cross-reference
interchangeable
NDC00009-0315-03Interchangeable
interchangeable cross-reference
interchangeable
1972Interchangeable
interchangeable cross-reference
interchangeable
17484-2Interchangeable
interchangeable cross-reference
interchangeable
8279XS2Interchangeable
interchangeable cross-reference
interchangeable
17H484-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 575410?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 575410?
575410 is a SEAL,PLAIN ENCASED.
What parts can replace 575410?
There are 18 known substitutes for 575410: NDC00009-0315-09, NDC00009-0315-03, 1972 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 575410?
575410 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-2751. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 575410

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026