PartsTable
Technical Data Sheet
Download PDF

5750590-6 — SEAL,NONMETALLIC ROUND SECTION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5750590-6: SEAL,NONMETALLIC ROUND SECTION.

The SEAL,NONMETALLIC ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM OVERALL, construction: SPLIT, end_cut_angle: 45.0 DEGREES, overall_length: 49.500 INCHES MINIMUM AND 50.500 INCHES MAXIMUM IN, style_designator: STRIP, end_item_identification: GEARBOX, FORWARD. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-617-6643, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5750590-6
NSN: 5330-01-617-6643
FSC: 5330 — Packing and Gasket Materials
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM OVERALL
constructionSPLIT
end_cut_angle45.0 DEGREES
overall_length49.500 INCHES MINIMUM AND 50.500 INCHES MAXIMUM IN
style_designatorSTRIP
end_item_identificationGEARBOX, FORWARD
cross-sectional_shape_styleCIRCULAR
cross_section_outside_diameter0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyPACKING, PREFORMED
NSN5330-01-617-6643
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5750590-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
•
END CUT ANGLE: 45.0 DEGREES
•
CROSS SECTION OUTSIDE DIAMETER: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248, TYPE 1, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH49.500 INCHES MINIMUM AND 50.500 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLECIRCULAR
END CUT ANGLE45.0 DEGREES
CROSS SECTION OUTSIDE DIAMETER0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING, PREFORMED
END ITEM IDENTIFICATIONGEARBOX, FORWARD
MATERIALRUBBER FLUOROCARBON CLASS FPM OVERALL
CONSTRUCTIONSPLIT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
241-5750590Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5750590-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5750590-6?
5750590-6 is a SEAL,NONMETALLIC ROUND SECTION.
What parts can replace 5750590-6?
There is 1 known substitute for 5750590-6: 241-5750590. Substitute compatibility should be verified for your specific system.
What is the NSN for 5750590-6?
5750590-6 is cataloged in the U.S. Government catalog under NSN 5330-01-617-6643. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5750590-6