PartsTable
Technical Data Sheet
5747 ✓ Verified by PartsTable
Multibrackets · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Multibrackets Pro Series M Floor to Ceiling Mount Pro MBFC3U White is a signage solution - ready to be installed.<br><br>The professional Pro Series A/V line from Multibrackets was designed with the installer in mind. Modular, easy to configure, quick to install and simple to maintain. Developed together with installers we added close to unlimited flexibility and versatility.

Based on the Pro Series ultra-flexible aluminum rail it is completely modular and has built in cable management throughout the entire solution to quicken installation and create an esthetic result worth the public eye.<br><br>With its modular construction installers can tailor the MBFC3U with the clients need in mind. Possibilities to change, update and reconfigure its design and if ideas change over time Pro Series can follow This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-161-9815, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
5747
NSN: 5315-00-161-9815
FSC: 5315
CAGE: 17866 — DIETZGEN CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleSTRAIGHT EDGE TYPE
body_width2.062 INCHES NOMINAL IN
head_styleINDENTED
shell_typeHOOD, TOP OPENING
sterilizedNO
body_height2.031 INCHES NOMINAL IN
body_length2.438 INCHES NOMINAL IN
point_styleSIDE
shank_styleSMOOTH ROUND
inside_depth4.625 INCHES NOMINAL IN
overall_width6.000 INCHES NOMINAL IN
NSN5315-00-161-9815
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5747 · Multibrackets ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: ZINC
STERILIZED: NO
FABRICATION METHOD: COLD FORMED
SHANK STYLE: SMOOTH ROUND
HEAD STYLE: INDENTED
POINT STYLE: SIDE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC
STERILIZEDNO
FABRICATION METHODCOLD FORMED
SHANK STYLESMOOTH ROUND
HEAD STYLEINDENTED
STERILIZEDNO
POINT STYLESIDE
SURFACE TREATMENTZINC
MATERIALSTEEL
FASTENER LENGTH0.750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5747Interchangeable
interchangeable cross-reference
interchangeable
RTG24-33-1Interchangeable
interchangeable cross-reference
interchangeable
862026PC2Interchangeable
interchangeable cross-reference
interchangeable
V5747Interchangeable
interchangeable cross-reference
interchangeable
95421Interchangeable
interchangeable cross-reference
interchangeable
1840669Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5747?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5747?
5747 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Multibrackets.
What parts can replace 5747?
There are 12 known substitutes for 5747: 5747, RTG24-33-1, 862026PC2 and 9 more. Substitute compatibility should be verified for your specific system.
Is 5747 still available?
5747 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5747