PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5740MILL3545
5740MILL3545 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

IBM 4-Port 10 / 100 / 1000 Base-TX PCI-X Adapter. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.8070 INCHES NOMINAL IN, surface_finish: GROUND, special_features: BRONZE OR STEEL FERRULE ON ID OF ONE WASHER,WASHERS OVERLAP,LUBRICATE WITH HIGH TEMP GREASE,MIL-L-3545,BANDED OD, style_designator: CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6195, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5740MILL3545
NSN: 3110-00-158-6195
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.8070 INCHES NOMINAL IN
surface_finishGROUND
special_featuresBRONZE OR STEEL FERRULE ON ID OF ONE WASHER,WASHERS OVERLAP,LUBRICATE WITH HIGH TEMP GREASE,MIL-L-3545,BANDED OD
style_designatorCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
bore_smallest_diameter2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
overall_outside_diameter3.5620 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
thrust_directional_capability_designationSINGLE
NSN3110-00-158-6195
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5740MILL3545 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SMALLEST DIAMETER: 2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.5620 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM IN
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.8070 INCHES NOMINAL IN
BORE SMALLEST DIAMETER2.0625 INCHES MINIMUM AND 2.0635 INCHES MAXIMUM IN
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.5620 INCHES MINIMUM AND 3.5770 INCHES MAXIMUM IN
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
SPECIAL FEATURESBRONZE OR STEEL FERRULE ON ID OF ONE WASHER,WASHERS OVERLAP,LUBRICATE WITH HIGH TEMP GREASE,MIL-L-3545,BANDED OD
ALIGNMENT TYPERIGID
MATERIALSTEEL OVERALL
SPECIAL FEATURESBRONZE OR STEEL FERRULE ON ID OF ONE WASHER,WASHERS OVERLAP,LUBRICATE WITH HIGH TEMP GREASE,MIL-L-3545,BANDED OD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
5-740Interchangeable
IBM 4-Port 10 / 100 / 1000 Base-TX PCI-X Adapter
interchangeable
2023-4001-03Interchangeable
interchangeable cross-reference
interchangeable
2023-4001Interchangeable
interchangeable cross-reference
interchangeable
850624Interchangeable
interchangeable cross-reference
interchangeable
5729MKInterchangeable
interchangeable cross-reference
interchangeable
347-0104-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5740MILL3545?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5740MILL3545?
5740MILL3545 is a IBM 4-Port 10 / 100 / 1000 Base-TX PCI-X Adapter.
What parts can replace 5740MILL3545?
There are 18 known substitutes for 5740MILL3545: 5-740, 2023-4001-03, 2023-4001 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5740MILL3545?
5740MILL3545 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6195. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5740MILL3545

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026