PartsTable
Technical Data Sheet
Download PDF

5740305 — BEARING,WASHER,THRUST

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

5740305: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 2.2800 INCHES NOMINAL IN, material: STEEL COMP 1010 OVERALL, key_width: 0.2600 INCHES NOMINAL IN, key_length: 0.3000 INCHES NOMINAL IN, corner_shape: SQUARE ALL CORNERS, surface_finish: 5.0 MICROINCHES LEFT SIDE. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-154-8516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5740305
NSN: 3120-01-154-8516
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
diameter2.2800 INCHES NOMINAL IN
materialSTEEL COMP 1010 OVERALL
key_width0.2600 INCHES NOMINAL IN
key_length0.3000 INCHES NOMINAL IN
corner_shapeSQUARE ALL CORNERS
key_quantity3
surface_finish5.0 MICROINCHES LEFT SIDE
hardness_rating80.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL
outside_diameter3.4000 INCHES NOMINAL IN
style_designatorROUND W/SQUARE KEYS
features_providedCASEHARDENED
overall_thickness0.0740 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN
NSN3120-01-154-8516
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 5740305 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 5.0 MICROINCHES LEFT SIDE
•
CORNER SHAPE: SQUARE ALL CORNERS
•
KEY WIDTH: 0.2600 INCHES NOMINAL IN
•
OVERALL THICKNESS: 0.0740 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL
•
STYLE DESIGNATOR: ROUND W/SQUARE KEYS
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH5.0 MICROINCHES LEFT SIDE
SURFACE FINISH5.0 MICROINCHES RIGHT SIDE
CORNER SHAPESQUARE ALL CORNERS
KEY WIDTH0.2600 INCHES NOMINAL IN
OVERALL THICKNESS0.0740 INCHES MINIMUM AND 0.0780 INCHES MAXIMUM IN
HARDNESS RATING80.0 ROCKWELL SUPERFICIAL 15-N MINIMUM OVERALL
STYLE DESIGNATORROUND W/SQUARE KEYS
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER2.2800 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SUBSTITUTES & CROSS-REFERENCES 2
3120PL0740137Reference document
Same NSN cross-reference
Reference document — Informative reference only
8625401Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 5740305?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5740305?
5740305 is a BEARING,WASHER,THRUST.
What parts can replace 5740305?
There are 2 known substitutes for 5740305: 3120PL0740137, 8625401. Substitute compatibility should be verified for your specific system.
What is the NSN for 5740305?
5740305 is cataloged in the U.S. Government catalog under NSN 3120-01-154-8516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5740305