PartsTable
Technical Data Sheet
Download PDF

5734J — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

5734J: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 3135 OVERALL, head_style: HEXAGON, head_height: 0.188 INCHES NOMINAL IN, thread_class: 3A A, thread_length: 0.625 INCHES MINIMUM IN, fastener_length: 0.625 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-208-7737, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5734J
NSN: 5305-00-208-7737
FSC: 5305 — Screws
CAGE: 77873 — ROCKFORD POWERTRAIN INC DIV POWERTRAIN ROCKFORD, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 3135 OVERALL
head_styleHEXAGON
head_height0.188 INCHES NOMINAL IN
thread_class3A A
thread_length0.625 INCHES MINIMUM IN
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.438 INCHES NOMINAL IN
nominal_thread_diameter0.312 INCHES IN
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch24
thread_series_designatorUNF
NSN5305-00-208-7737
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5734J · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.188 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.188 INCHES NOMINAL IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
THREAD LENGTH0.625 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.438 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH LBS
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
SC-40-80Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
27359Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5734J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5734J?
5734J is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 5734J?
There are 2 known substitutes for 5734J: SC-40-80, 27359. Substitute compatibility should be verified for your specific system.
What is the NSN for 5734J?
5734J is cataloged in the U.S. Government catalog under NSN 5305-00-208-7737. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5734J