5727699-1 — RIVET,TUBULAR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

5727699-1: RIVET,TUBULAR.

The RIVET,TUBULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), hole_depth: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, shank_style: TUBULAR, hole_diameter: 0.039 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN, shank_diameter: 0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-268-0001, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

5727699-1

NSN: 5320-01-268-0001
FSC: 5320 — Rivets
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)

SPECIFICATIONS

material	STEEL COMP 303 OVERALL
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
hole_depth	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
shank_style	TUBULAR
hole_diameter	0.039 INCHES MINIMUM AND 0.044 INCHES MAXIMUM IN
shank_diameter	0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
fastener_length	0.100 INCHES MAXIMUM IN
countersink_angle	100.0 DEGREES NOMINAL
surface_treatment	PASSIVATE OVERALL
head_major_diameter	0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN
surface_treatment_document_and_classification	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN	5320-01-268-0001

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.100 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL

•

HOLE DEPTH: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

SHANK STYLE: TUBULAR

•

SURFACE TREATMENT: PASSIVATE OVERALL

•

COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.058 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
FASTENER LENGTH	0.100 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HOLE DEPTH	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SHANK STYLE	TUBULAR
SURFACE TREATMENT	PASSIVATE OVERALL
COUNTERSINK ANGLE	100.0 DEGREES NOMINAL
MATERIAL	STEEL COMP 303 OVERALL
HEAD MAJOR DIAMETER	0.100 INCHES MINIMUM AND 0.110 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 1

719823-1Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 5727699-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 5727699-1?

5727699-1 is a RIVET,TUBULAR.

What parts can replace 5727699-1?

There is 1 known substitute for 5727699-1: 719823-1. Substitute compatibility should be verified for your specific system.

What is the NSN for 5727699-1?

5727699-1 is cataloged in the U.S. Government catalog under NSN 5320-01-268-0001. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

5727699-1 — RIVET,TUBULAR

Request a Quote — 5727699-1