PartsTable
Technical Data Sheet
PartsTable / MRO / 57234
57234 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: RUBBER SYNTHETIC OVERALL, body_length: 2.000 INCHES NOMINAL IN, body_diameter: 0.438 INCHES NOMINAL IN, terminal_type: TAB, SOLDER LUG, inclosure_type: ENCAPSULATED, terminal_width: 0.281 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-467-3057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 57234
NSN: 4720-00-467-3057
FSC: 4720
CAGE: 73842 — GOODYEAR TIRE AND RUBBER CO THE (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
body_length2.000 INCHES NOMINAL IN
body_diameter0.438 INCHES NOMINAL IN
terminal_typeTAB, SOLDER LUG
inclosure_typeENCAPSULATED
terminal_width0.281 INCHES NOMINAL IN
wall_thickness0.250 INCHES NOMINAL IN
inside_diameter2.125 INCHES NOMINAL IN
terminal_length0.562 INCHES NOMINAL IN
style_designatorRADIAL TERMINAL EACH END
electrical_resistance100.000 OHMS
reliability_indicatorNOT ESTABLISHED
NSN4720-00-467-3057
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 57234 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC COVER
•
WALL THICKNESS: 0.250 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC COVER
MATERIALRUBBER SYNTHETIC OVERALL
WALL THICKNESS0.250 INCHES NOMINAL IN
INSIDE DIAMETER2.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
TP-7Interchangeable
interchangeable cross-reference
interchangeable
13221E8309Interchangeable
interchangeable cross-reference
interchangeable
1-2INMPTPLUGSCH80PVCInterchangeable
interchangeable cross-reference
interchangeable
K57234Interchangeable
interchangeable cross-reference
interchangeable
57234Interchangeable
interchangeable cross-reference
interchangeable
ACL0PInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57234?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57234?
57234 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 57234?
There are 18 known substitutes for 57234: TP-7, 13221E8309, 1-2INMPTPLUGSCH80PVC and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 57234?
57234 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-467-3057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57234

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026