PartsTable
Technical Data Sheet
Download PDF

572174 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
Legrand · NUT WASHER
PRODUCT OVERVIEW

572174: PIN,STRAIGHT,HEADLESS.

Mechanisms supplied with rocker plates, to be equipped with support frames and surround plates. To be equipped with LED. Key specifications include material: STEEL COMP 416 OVERALL, first_end_style: SQUARE, hardness_rating: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL, pin_overall_length: 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN, first_hole_diameter: 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN, pin_overall_diameter: 0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN.

This part is cataloged in the U.S. Government catalog under NSN 5315-01-072-9830, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
572174
NSN: 5315-01-072-9830
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
first_end_styleSQUARE
hardness_rating30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
pin_overall_length0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
first_hole_diameter0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
pin_overall_diameter0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
second_hole_diameter0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
hole_arrangement_styleBOTH END DRILLED
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes0.675 INCHES NOMINAL IN
distance_from_centerline_of_hole_to_end_of_pin0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
NSN5315-01-072-9830
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 572174 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: SQUARE
•
FIRST HOLE DIAMETER: 0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLESQUARE
FIRST HOLE DIAMETER0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PIN OVERALL DIAMETER0.0935 INCHES MINIMUM AND 0.0940 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.725 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.030 INCHES MINIMUM AND 0.038 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN HOLES0.675 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 572174?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 572174?
572174 is a PIN,STRAIGHT,HEADLESS manufactured by Legrand.
What is the NSN for 572174?
572174 is cataloged in the U.S. Government catalog under NSN 5315-01-072-9830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 572174

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.