PartsTable
Technical Data Sheet
Download PDF

572151 — CLAMP,LOOP

✓ Government record, cited
Legrand · ORING SEAL
PRODUCT OVERVIEW

572151: CLAMP,LOOP.

Mechanisms supplied with rocker plates, to be equipped with surround plates. Support frame not needed. Double pole fused 13 A (fuse supplied).

Flex outlet knockout and cord grip. Captive fuse carrier (padlockable). Captive terminal screws.

Conform to BS 1363 : Part 4. This part is cataloged in the U.S. Government catalog under NSN 5340-00-903-2309, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
572151
NSN: 5340-00-903-2309
FSC: 5340 — Hardware, Commercial
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.500 INCHES NOMINAL IN
material_diameter0.035 INCHES NOMINAL IN
loop_inside_diameter0.300 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.650 INCHES NOMINAL IN
distance_from_outer_edge_of_lug_to_hole_center0.280 INCHES NOMINAL IN
NSN5340-00-903-2309
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 572151 MFR: Legrand ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DIAMETER: 0.035 INCHES NOMINAL IN
•
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER: 0.280 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.650 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
LOOP INSIDE DIAMETER: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DIAMETER0.035 INCHES NOMINAL IN
DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER0.280 INCHES NOMINAL IN
OVERALL WIDTH0.500 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END0.650 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
LOOP INSIDE DIAMETER0.300 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 572151?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 572151?
572151 is a CLAMP,LOOP manufactured by Legrand.
What is the NSN for 572151?
572151 is cataloged in the U.S. Government catalog under NSN 5340-00-903-2309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 572151