PartsTable
Technical Data Sheet
Download PDF

572-101 — SANDBAG SET,CERVICAL,X-RAY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

572-101: SANDBAG SET,CERVICAL,X-RAY.

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C OVERALL, body_width: 1.375 INCHES NOMINAL IN, body_height: 1.500 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN, inclosure_type: PARTIALLY INCLOSED, DOUBLE SHELL, mounting_method: UNTHREADED HOLE(S) SINGLE GROUP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-919-6638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
572-101
NSN: 5330-00-919-6638
NIINs: 009196638, 009459608, 014275635
FSC: 5330 — Packing and Gasket Materials
CAGE: 73030 — HAMILTON SUNDSTRAND CORPORATION DBA COLLINS AEROSPACE (USA)
SPECIFICATIONS
materialSTEEL COMP 440C OVERALL
body_width1.375 INCHES NOMINAL IN
body_height1.500 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
inclosure_typePARTIALLY INCLOSED, DOUBLE SHELL
mounting_methodUNTHREADED HOLE(S) SINGLE GROUP
frequency_rating10.0 KILOHERTZ NOMINAL SINGLE COMPONENT
special_featuresBRAND NAME DESCRIPTION AQ1 - 12 GAUGE;ADDITIONAL ITEM INFORMATION AQ1 29-9/16 X 26 X .012,R,W;REQUIRED MINIMUM ORDER QUANTITY 1;REQUIRED MULTIPLE ORDER QUANTITY 1
surface_treatmentRUBBER OVERALL
inner_groove_depth0.0504 INCHES MINIMUM AND 0.0541 INCHES MAXIMUM IN
peripheral_diameter0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
center_hole_diameter0.4998 INCHES MINIMUM AND 0.5003 INCHES MAXIMUM IN
NSN5330-00-919-6638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 572-101 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.256 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
•
INNER GROOVE DEPTH: 0.0504 INCHES MINIMUM AND 0.0541 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,CL 440C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
FLANGED BODY OUTSIDE DIAMETER: 0.630 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
•
SURFACE TREATMENT: RUBBER OVERALL
•
CENTER HOLE DIAMETER: 0.4998 INCHES MINIMUM AND 0.5003 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
CROSS-SECTIONAL HEIGHT0.256 INCHES MINIMUM AND 0.264 INCHES MAXIMUM IN
INNER GROOVE DEPTH0.0504 INCHES MINIMUM AND 0.0541 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CL 440C FED SPEC SINGLE MATERIAL RESPONSE OVERALL
FLANGED BODY OUTSIDE DIAMETER0.630 INCHES NOMINAL IN
PERIPHERAL DIAMETER0.720 INCHES MINIMUM AND 0.730 INCHES MAXIMUM IN
SURFACE TREATMENTRUBBER OVERALL
CENTER HOLE DIAMETER0.4998 INCHES MINIMUM AND 0.5003 INCHES MAXIMUM IN
MATERIALSTEEL COMP 440C OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 572-101?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 572-101?
572-101 is a SANDBAG SET,CERVICAL,X-RAY.
What is the NSN for 572-101?
572-101 is cataloged in the U.S. Government catalog under NSN 5330-00-919-6638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 572-101

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.