PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5719-1
5719-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The STRAINER ELEMENT,SEDIMENT is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY, shaft_type: ROUND, V FLATTED SINGLE ACTUATOR, shaft_length: 0.531 INCHES NOMINAL SINGLE ACTUATOR IN, overall_width: 1.000 INCHES NOMINAL IN, pole_quantity: 3 SINGLE SECTION REAR, terminal_type: TAB, SOLDER LUG. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-158-6274, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5719-1
NSN: 3110-00-158-6274
FSC: 3110
CAGE: 43766 — SKF INDUSTRIES INC NICE BEARING PRODUCTS DIV (USA)
SPECIFICATIONS
materialNICKEL ALLOY
shaft_typeROUND, V FLATTED SINGLE ACTUATOR
shaft_length0.531 INCHES NOMINAL SINGLE ACTUATOR IN
overall_width1.000 INCHES NOMINAL IN
pole_quantity3 SINGLE SECTION REAR
terminal_typeTAB, SOLDER LUG
thread_length0.313 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
alignment_typeRIGID
overall_height1.438 INCHES NOMINAL IN
overall_length2.157 INCHES NOMINAL IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
surface_finishGROUND
NSN3110-00-158-6274
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5719-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
MATERIAL: STEEL OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
SPECIAL FEATURESBANDED OD;BORE DIA OF LARGE BORE WASHER 0.5300 IN. MIN IN
MATERIALSTEEL OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
8329423Interchangeable
interchangeable cross-reference
interchangeable
A395X19Interchangeable
interchangeable cross-reference
interchangeable
S7-19Interchangeable
interchangeable cross-reference
interchangeable
32357Interchangeable
interchangeable cross-reference
interchangeable
131196Interchangeable
interchangeable cross-reference
interchangeable
S9-19Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5719-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5719-1?
5719-1 is a STRAINER ELEMENT,SEDIMENT.
What parts can replace 5719-1?
There are 15 known substitutes for 5719-1: 8329423, A395X19, S7-19 and 12 more. Substitute compatibility should be verified for your specific system.
Is 5719-1 still available?
5719-1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5719-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026