PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5710-37
5710-37 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The MICROCIRCUIT,DIGITAL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, thickness: 0.016 INCHES NOMINAL IN, head_style: HEXAGON, head_height: 0.312 INCHES NOMINAL IN, thread_class: 2A A, hole_diameter: 0.189 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-057-1037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5710-37
NSN: 5305-00-057-1037
FSC: 5305
CAGE: 00000
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
thickness0.016 INCHES NOMINAL IN
head_styleHEXAGON
head_height0.312 INCHES NOMINAL IN
thread_class2A A
hole_diameter0.189 INCHES MINIMUM AND 0.194 INCHES MAXIMUM IN
thread_length1.250 INCHES MINIMUM IN
fastener_length3.000 INCHES NOMINAL IN
hardness_rating25.0 ROCKWELL C MINIMUM
overall_diameter0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
special_featuresFLIGHT SAFETY CRITICAL AIRCRAFT PART
thread_directionRIGHT-HAND
NSN5305-00-057-1037
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5710-37 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 1.250 INCHES MINIMUM IN
•
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL OVERALL
•
THREAD CLASS: 2A A
•
FASTENER LENGTH: 3.000 INCHES NOMINAL IN
•
THREAD QUANTITY PER INCH: 13
•
NOMINAL THREAD DIAMETER: 0.500 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH1.250 INCHES MINIMUM IN
WIDTH BETWEEN FLATS0.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL OVERALL
THREAD CLASS2A A
FASTENER LENGTH3.000 INCHES NOMINAL IN
THREAD QUANTITY PER INCH13
NOMINAL THREAD DIAMETER0.500 INCHES IN
SURFACE TREATMENTPHOSPHATE OVERALL
NONDEFINITIVE SPEC/STD DATAII TYPE AND 10P STYLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
1243603-4Interchangeable
interchangeable cross-reference
interchangeable
8720Interchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
571037Interchangeable
interchangeable cross-reference
interchangeable
FFS85TYPE2STYLE10PInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5710-37?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5710-37?
5710-37 is a MICROCIRCUIT,DIGITAL.
What parts can replace 5710-37?
There are 5 known substitutes for 5710-37: 1243603-4, 8720, FF-W-92 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5710-37?
5710-37 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-057-1037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5710-37

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026