PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 571-4824-1486568REVAPC52
571-4824-1486568REVAPC52 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING ASSEMBLY is a the manufacturer industrial component. Key specifications include height: 1.500 INCHES NOMINAL IN, material: PLASTIC INTERMEDIATE RING, inside_diameter: 0.250 INCHES NOMINAL IN, outside_diameter: 0.688 INCHES NOMINAL IN, cross-sectional_shape_style: ANGLE INTERMEDIATE RING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
571-4824-1486568REVAPC52
NSN: 5330-00-291-1727
FSC: 5330
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
height1.500 INCHES NOMINAL IN
materialPLASTIC INTERMEDIATE RING
inside_diameter0.250 INCHES NOMINAL IN
outside_diameter0.688 INCHES NOMINAL IN
intermediate_ring_quantity3
cross-sectional_shape_styleANGLE INTERMEDIATE RING
NSN5330-00-291-1727
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 571-4824-1486568REVAPC52 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC INTERMEDIATE RING
•
INSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
INTERMEDIATE RING QUANTITY: 3
•
CROSS-SECTIONAL SHAPE STYLE: ANGLE INTERMEDIATE RING
•
HEIGHT: 1.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.688 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC INTERMEDIATE RING
INSIDE DIAMETER0.250 INCHES NOMINAL IN
INTERMEDIATE RING QUANTITY3
CROSS-SECTIONAL SHAPE STYLEANGLE INTERMEDIATE RING
HEIGHT1.500 INCHES NOMINAL IN
OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
MATERIALPLASTIC TOP RING
MATERIALPLASTIC BOTTOM RING
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
E90Interchangeable
interchangeable cross-reference
interchangeable
E17A4Interchangeable
interchangeable cross-reference
interchangeable
20087Interchangeable
interchangeable cross-reference
interchangeable
MS51975-29Interchangeable
interchangeable cross-reference
interchangeable
C61076 PIECE 7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 571-4824-1486568REVAPC52?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 571-4824-1486568REVAPC52?
571-4824-1486568REVAPC52 is a PACKING ASSEMBLY.
What parts can replace 571-4824-1486568REVAPC52?
There are 5 known substitutes for 571-4824-1486568REVAPC52: E90, E17A4, 20087 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 571-4824-1486568REVAPC52?
571-4824-1486568REVAPC52 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-291-1727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 571-4824-1486568REVAPC52

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026