PartsTable
Technical Data Sheet
Download PDF

570A460-764B180 — GEAR,SPUR

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

570A460-764B180: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024 HUB, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-871-3700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
570A460-764B180
NSN: 3020-00-871-3700
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 25500 — LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024 HUB
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter1.8740 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM IN
pressure_angle20.0000 DEGREES
teeth_quantity180
style_designatorPROTRUDING HUB
attachment_methodCLAMP
surface_treatmentPASSIVATE TEETH
end_nominal_length0.234 INCHES FIRST END IN
face_nominal_width0.125 INCHES IN
NSN3020-00-871-3700
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available GEAR,SPUR TITLE COMPONENT PN 570A460-764B180 MFR GEAR,SPUR
KEY FEATURES
•
BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN
•
TEETH QUANTITY: 180
•
BODY STYLE: PLAIN, SOLID
•
BORE STYLE: PLAIN BOTH ENDS
•
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.264 INCHES FIRST END IN
•
FIRST STEP NOMINAL LENGTH: 0.030 INCHES FIRST END IN
•
PRECISION CLASSIFICATION: QUALITY NUMBER 10 OR QUALITY NUMBER 11
•
STYLE DESIGNATOR: PROTRUDING HUB
TECHNICAL CHARACTERISTICS
BORE NOMINAL DIAMETER0.125 INCHES BOTH ENDS IN
TEETH QUANTITY180
BODY STYLEPLAIN, SOLID
BORE STYLEPLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END0.264 INCHES FIRST END IN
FIRST STEP NOMINAL LENGTH0.030 INCHES FIRST END IN
PRECISION CLASSIFICATIONQUALITY NUMBER 10 OR QUALITY NUMBER 11
STYLE DESIGNATORPROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE HUB
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE TEETH
SUBSTITUTES & CROSS-REFERENCES 1
570A460-764Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 570A460-764B180?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 570A460-764B180?
570A460-764B180 is a GEAR,SPUR.
What parts can replace 570A460-764B180?
There is 1 known substitute for 570A460-764B180: 570A460-764. Substitute compatibility should be verified for your specific system.
What is the NSN for 570A460-764B180?
570A460-764B180 is cataloged in the U.S. Government catalog under NSN 3020-00-871-3700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 570A460-764B180