PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 570596
570596 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC BODY, base_height: 0.688 INCHES NOMINAL IN, overall_height: 0.094 INCHES NOMINAL IN, style_designator: THRU-HOLE, base_outside_diameter: 1.375 INCHES NOMINAL IN, opening_inside_diameter: 0.718 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-523-1943, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
570596
NSN: 5340-01-523-1943
FSC: 5340
CAGE: 60764 — WIGGINS LIFT CO INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC BODY
base_height0.688 INCHES NOMINAL IN
overall_height0.094 INCHES NOMINAL IN
style_designatorTHRU-HOLE
base_outside_diameter1.375 INCHES NOMINAL IN
opening_inside_diameter0.718 INCHES NOMINAL IN
NSN5340-01-523-1943
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 570596 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BASE HEIGHT: 0.688 INCHES NOMINAL IN
•
OPENING INSIDE DIAMETER: 0.718 INCHES NOMINAL IN
•
STYLE DESIGNATOR: THRU-HOLE
•
MATERIAL: RUBBER SYNTHETIC BODY
•
BASE OUTSIDE DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BASE HEIGHT0.688 INCHES NOMINAL IN
OPENING INSIDE DIAMETER0.718 INCHES NOMINAL IN
STYLE DESIGNATORTHRU-HOLE
MATERIALRUBBER SYNTHETIC BODY
BASE OUTSIDE DIAMETER1.375 INCHES NOMINAL IN
OVERALL HEIGHT0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
R2JD4Upgraded Successor
successor cross-reference
successor
5-49Upgraded Successor
successor cross-reference
successor
70C44806E01Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 570596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 570596?
570596 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 570596?
There are 3 known substitutes for 570596: R2JD4, 5-49, 70C44806E01. Substitute compatibility should be verified for your specific system.
What is the NSN for 570596?
570596 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-523-1943. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 570596

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026