PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5702-225-30C1
5702-225-30C1 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.030 INCHES NOMINAL IN, hole_diameter: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN, overall_diameter: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-417-1253, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5702-225-30C1
NSN: 5310-01-417-1253
FSC: 5310
CAGE: 86928 — SEASTROM MANUFACTURING CO INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.030 INCHES NOMINAL IN
hole_diameter0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
overall_diameter0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
surface_treatment_document_and_classificationQQ-P-416, TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-417-1253
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5702-225-30C1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
OVERALL DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
THICKNESS: 0.030 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
OVERALL DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.030 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
CENTER HOLE SHAPE STYLEROUND
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TY 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
160-2027-04-01-00Interchangeable
interchangeable cross-reference
interchangeable
1JA2597-22Interchangeable
interchangeable cross-reference
interchangeable
532-D-1Interchangeable
interchangeable cross-reference
interchangeable
1030-1-4Interchangeable
interchangeable cross-reference
interchangeable
5001-299Interchangeable
interchangeable cross-reference
interchangeable
391437 ITEM 2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5702-225-30C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5702-225-30C1?
5702-225-30C1 is a WASHER,FLAT.
What parts can replace 5702-225-30C1?
There are 6 known substitutes for 5702-225-30C1: 160-2027-04-01-00, 1JA2597-22, 532-D-1 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5702-225-30C1?
5702-225-30C1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-417-1253. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5702-225-30C1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026