PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5702-0506
5702-0506 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.375 INCHES NOMINAL IN, overall_length: 0.625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-2770, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5702-0506
NSN: 5340-00-514-2770
FSC: 5340
CAGE: 96214 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.375 INCHES NOMINAL IN
overall_length0.625 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentCADMIUM
material_thickness0.032 INCHES NOMINAL IN
mounting_hole_size0.142 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
inside_diameter/arch_length0.156 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.093 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole0.281 INCHES NOMINAL IN
NSN5340-00-514-2770
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5702-0506 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: CADMIUM
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.093 INCHES NOMINAL IN
•
MOUNTING PAD: NOT INCLUDED
•
MOUNTING HOLE SIZE: 0.142 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
•
INSIDE DIAMETER/ARCH LENGTH: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORCURVED ARCH
SURFACE TREATMENTCADMIUM
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.093 INCHES NOMINAL IN
OVERALL WIDTH0.375 INCHES NOMINAL IN
MOUNTING PADNOT INCLUDED
MOUNTING HOLE SIZE0.142 INCHES MINIMUM AND 0.152 INCHES MAXIMUM IN
INSIDE DIAMETER/ARCH LENGTH0.156 INCHES NOMINAL IN
OVERALL LENGTH0.625 INCHES NOMINAL IN
MATERIAL THICKNESS0.032 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
SURG-O-PAKUpgraded Successor
successor cross-reference
successor
139Upgraded Successor
successor cross-reference
successor
BRX48-1Interchangeable
interchangeable cross-reference
interchangeable
87-0098Interchangeable
interchangeable cross-reference
interchangeable
122P132Interchangeable
interchangeable cross-reference
interchangeable
31-0207Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5702-0506?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5702-0506?
5702-0506 is a STRAP,RETAINING.
What parts can replace 5702-0506?
There are 10 known substitutes for 5702-0506: SURG-O-PAK, 139, BRX48-1 and 7 more. Substitute compatibility should be verified for your specific system.
Is 5702-0506 still available?
5702-0506 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5702-0506

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026