PartsTable
Technical Data Sheet
Download PDF

5701C — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

5701C: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INNER RING, bore_shape: STRAIGHT, bore_diameter: 4.1250 INCHES NOMINAL IN, overall_width: 0.5000 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-120-1656, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5701C
NSN: 3110-00-120-1656
NIINs: 001201656, 008001433
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 06144 — INDUSTRIAL TECTONICS BEARINGS CORPORATION DBA RBC BEARINGS INC DIV INDUSTRIAL TECTONICS BEARINGS (USA)
SPECIFICATIONS
materialSTEEL COMP 440C INNER RING
bore_shapeSTRAIGHT
bore_diameter4.1250 INCHES NOMINAL IN
overall_width0.5000 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0015 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter5.1250 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.3
NSN3110-00-120-1656
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 5701C · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL CLEARANCE: 0.0015 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 5.1250 INCHES NOMINAL IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
LUBRICATION MATERIALGREASE
INTERNAL CLEARANCE0.0015 INCHES MINIMUM RADIAL AND 0.0020 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.5000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER5.1250 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.3
SUBSTITUTES & CROSS-REFERENCES 1
36C815-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5701C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5701C?
5701C is a BEARING,BALL,ANNULAR.
What parts can replace 5701C?
There is 1 known substitute for 5701C: 36C815-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 5701C?
5701C is cataloged in the U.S. Government catalog under NSN 3110-00-120-1656. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5701C