PartsTable
Technical Data Sheet
Download PDF

570-40-20 — BUMPER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

570-40-20: BUMPER.

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER, hole_diameter: 0.188 INCHES NOMINAL IN, overall_height: 0.563 INCHES NOMINAL IN, style_designator: FLAT TOP COUNTERBORED, end_item_identification: HIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS), first_counterbore_depth: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-058-7384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
570-40-20
NSN: 5340-01-058-7384
FSC: 5340 — Hardware, Commercial
CAGE: 07055 — BESELER, CHARLES CO INC (USA)
SPECIFICATIONS
materialRUBBER
hole_diameter0.188 INCHES NOMINAL IN
overall_height0.563 INCHES NOMINAL IN
style_designatorFLAT TOP COUNTERBORED
end_item_identificationHIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
first_counterbore_depth0.250 INCHES NOMINAL IN
material_hardness_rating70.0 SHORE DUROMETER A NOMINAL
first_counterbore_diameter0.375 INCHES NOMINAL IN
outside/top_flange_diameter0.750 INCHES NOMINAL IN
NSN5340-01-058-7384
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 570-40-20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE/TOP FLANGE DIAMETER: 0.750 INCHES NOMINAL IN
•
MATERIAL HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
FIRST COUNTERBORE DIAMETER: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLAT TOP COUNTERBORED
•
FIRST COUNTERBORE DEPTH: 0.250 INCHES NOMINAL IN
•
COLOR: BLACK
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.563 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.750 INCHES NOMINAL IN
MATERIAL HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
FIRST COUNTERBORE DIAMETER0.375 INCHES NOMINAL IN
STYLE DESIGNATORFLAT TOP COUNTERBORED
FIRST COUNTERBORE DEPTH0.250 INCHES NOMINAL IN
COLORBLACK
END ITEM IDENTIFICATIONHIGH-MOBILITY ARTILLERY ROCKET SYSTEM (HIMARS)
MATERIALRUBBER
HOLE DIAMETER0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 5
570-40-20CXSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
44-10036-0AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
17601-17Reference document
Same NSN cross-reference
Reference document — Secondary reference
12418629Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
999-000891Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 570-40-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 570-40-20?
570-40-20 is a BUMPER.
What parts can replace 570-40-20?
There are 5 known substitutes for 570-40-20: 570-40-20CX, 44-10036-0A, 17601-17 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 570-40-20?
570-40-20 is cataloged in the U.S. Government catalog under NSN 5340-01-058-7384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 570-40-20