PartsTable
Technical Data Sheet
PartsTable / MRO / 57-1-1
57-1-1 ✓ Verified by PartsTable
Multibrackets · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

M Pro Series Enclosure 65" Floor to Ceiling Medium is a signage solution - ready to be installed.<br><br>The professional Pro Series A/V line from Multibrackets was designed with the installer in mind. Modular, easy to configure, quick to install and simple to maintain. Developed together with installers we added close to unlimited flexibility and versatility.

Based on the Pro Series ultra-flexible aluminum rail it is completely modular and has built in cable management throughout the entire solution to quicken installation and create an esthetic result worth the public eye.<br><br>With its modular construction installers can tailor the M Pro Series Enclosure 65" Floor to Ceiling Medium with the clients need in mind. Possibilities to change, update and reconfigure its design and if ideas change over time Pro Series can follow.<br><br>The M Pro Series Enclosure 65" Floor to Ceiling Medium creates a rock steady screen display solution aimed for the retail store, mall or any other public This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-5693, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 57-1-1
NSN: 5330-00-168-5693
FSC: 5330
CAGE: 07443 — LANDOLL CORPORATION DBA LANDOLL CORPORATION DREXEL DIVISION DIV DREXEL (USA)
SPECIFICATIONS
hoist1.891 FEET FT
diameter3.5020 INCHES MINIMUM AND 3.5040 INCHES MAXIMUM IN
materialCOPPER ALLOY 932 OR COPPER ALLOY 841 OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
cloth_nameBUNTING
seal_width0.375 INCHES NOMINAL IN
tooth_formSTANDARD
temp_rating-40.0 FAHRENHEIT AND 300.0 FAHRENHEIT DEGF
constructionSOLID
corner_shapeSQUARE ALL CORNERS
fiber_materialNYLON
NSN5330-00-168-5693
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 57-1-1 MFR: Multibrackets ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
TECHNICAL CHARACTERISTICS (FLIS)
SUPPLEMENTARY FEATURESCROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200
SPECIAL FEATURESSTYLE DESIGNATOR:NO.60 IRREGULAR SHAPE FROM FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
386SIZE1-2INInterchangeable
interchangeable cross-reference
interchangeable
B16.11Interchangeable
interchangeable cross-reference
interchangeable
MS14304-1C08Interchangeable
interchangeable cross-reference
interchangeable
5-7-11/REAR ADM SIZE 4/57X81INInterchangeable
interchangeable cross-reference
interchangeable
5-7-11 REAR ADM SIZE 4/57X81INInterchangeable
interchangeable cross-reference
interchangeable
MILF2692Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 57-1-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 57-1-1?
57-1-1 is a TUNER,RADIO FREQUENCY manufactured by Multibrackets. It is classified as a MRO (MRO_GENERAL).
What parts can replace 57-1-1?
There are 18 known substitutes for 57-1-1: 386SIZE1-2IN, B16.11, MS14304-1C08 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 57-1-1?
57-1-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-168-5693. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 57-1-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026