PartsTable
Technical Data Sheet
Download PDF

56AX107 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

56AX107: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, style_designator: NON-CIRCULAR, aperture_diameter: 1.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-974-7543, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
56AX107
NSN: 5330-00-974-7543
FSC: 5330 — Packing and Gasket Materials
CAGE: 76040 — MACK TRUCKS INC PARTS OPN (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.750 INCHES NOMINAL IN
bolt_hole_quantity2
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-974-7543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 56AX107 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.750 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 2
•
MATERIAL: PAPER AND GLUE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,NO. +3313-B MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.750 INCHES NOMINAL IN
BOLT HOLE QUANTITY2
MATERIALPAPER AND GLUE OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
194215Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
20705952Reference document
Same NSN cross-reference
Reference document — Secondary reference
56AX547Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 56AX107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 56AX107?
56AX107 is a GASKET.
What parts can replace 56AX107?
There are 3 known substitutes for 56AX107: 194215, 20705952, 56AX547. Substitute compatibility should be verified for your specific system.
What is the NSN for 56AX107?
56AX107 is cataloged in the U.S. Government catalog under NSN 5330-00-974-7543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 56AX107