PartsTable
Technical Data Sheet
Download PDF

5692293 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5692293: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN, construction: SOLID, housing_bore_diameter: 1.326 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN, accommodated_shaft_diameter: 0.909 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-843-9137, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5692293
NSN: 5330-00-843-9137
FSC: 5330 — Packing and Gasket Materials
CAGE: 0A335 — LINEAR MOTION LLC DIV UGM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
constructionSOLID
housing_bore_diameter1.326 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN
accommodated_shaft_diameter0.909 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-843-9137
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5692293 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.326 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.909 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.326 INCHES MINIMUM AND 1.374 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.909 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 3
5687063Reference document
Same NSN cross-reference
Reference document — Secondary reference
AT 12605Reference document
Same NSN cross-reference
Reference document — Secondary reference
33MGE1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 5692293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5692293?
5692293 is a SEAL,PLAIN.
What parts can replace 5692293?
There are 3 known substitutes for 5692293: 5687063, AT 12605, 33MGE1. Substitute compatibility should be verified for your specific system.
What is the NSN for 5692293?
5692293 is cataloged in the U.S. Government catalog under NSN 5330-00-843-9137. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5692293