PartsTable
Technical Data Sheet
PartsTable / O-RING / 569097-18
569097-18 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-483-8825, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
569097-18
NSN: 5331-00-483-8825
FSC: 5331 — O-RING
CAGE: 59774 — FABCO GENERATORS, INC. DBA FABCO POWER (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-483-8825
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 569097-18 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.290 INCHES MINIMUM AND 1.302 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
R9330Interchangeable
interchangeable cross-reference
interchangeable
031-2220Interchangeable
interchangeable cross-reference
interchangeable
34BNC50-0-1Interchangeable
interchangeable cross-reference
interchangeable
TC-28Interchangeable
interchangeable cross-reference
interchangeable
923718Interchangeable
interchangeable cross-reference
interchangeable
8501-V2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 569097-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 569097-18?
569097-18 is a O-RING.
What parts can replace 569097-18?
There are 7 known substitutes for 569097-18: R9330, 031-2220, 34BNC50-0-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 569097-18?
569097-18 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-483-8825. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 569097-18

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026