PartsTable
Technical Data Sheet
Download PDF

569-7067771-A21 — COVER,ACCESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

569-7067771-A21: COVER,ACCESS.

The COVER,ACCESS is a the manufacturer industrial component. Key specifications include width: 17.200 INCHES NOMINAL IN, length: 13.980 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, body_thickness: 0.300 INCHES NOMINAL IN, securing_device_type: THREADED FASTENER, peripheral_shape_style: RECTANGLE, MULTI HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-497-7114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
569-7067771-A21
NSN: 5340-01-497-7114
FSC: 5340 — Hardware, Commercial
CAGE: 53711 — NAVAL SEA SYSTEMS COMMAND (USA)
SPECIFICATIONS
width17.200 INCHES NOMINAL IN
length13.980 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
body_thickness0.300 INCHES NOMINAL IN
securing_device_typeTHREADED FASTENER
peripheral_shape_styleRECTANGLE, MULTI HOLES
hole_quantity_along_width6
cross-sectional_shape_styleFLAT
distance_between_holes_along_width6.000 INCHES NOMINAL IN
distance_between_holes_along_length13.840 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_width2.070 INCHES NOMINAL IN
distance_from_first_hole_centerline_to_end_along_length0.990 INCHES NOMINAL IN
NSN5340-01-497-7114
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 569-7067771-A21 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH: 2.070 INCHES NOMINAL IN
•
LENGTH: 13.980 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG LENGTH: 13.840 INCHES NOMINAL IN
•
DISTANCE BETWEEN HOLES ALONG WIDTH: 6.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: FLAT
•
SECURING DEVICE TYPE: THREADED FASTENER
•
HOLE QUANTITY ALONG WIDTH: 6
•
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH: 0.990 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG WIDTH2.070 INCHES NOMINAL IN
LENGTH13.980 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG LENGTH13.840 INCHES NOMINAL IN
DISTANCE BETWEEN HOLES ALONG WIDTH6.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEFLAT
SECURING DEVICE TYPETHREADED FASTENER
HOLE QUANTITY ALONG WIDTH6
DISTANCE FROM FIRST HOLE CENTERLINE TO END ALONG LENGTH0.990 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLERECTANGLE, MULTI HOLES
WIDTH17.200 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
7067771Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
H677-2401-A21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 569-7067771-A21?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 569-7067771-A21?
569-7067771-A21 is a COVER,ACCESS.
What parts can replace 569-7067771-A21?
There are 2 known substitutes for 569-7067771-A21: 7067771, H677-2401-A21. Substitute compatibility should be verified for your specific system.
What is the NSN for 569-7067771-A21?
569-7067771-A21 is cataloged in the U.S. Government catalog under NSN 5340-01-497-7114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 569-7067771-A21

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.