PartsTable
Technical Data Sheet
Download PDF

569-4903-1191502ALT1PC36 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

569-4903-1191502ALT1PC36: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, minor_width: 0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN, construction: SOLID, minor_height: 0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN, special_features: 0.062 IN. RADIUS ON CORNERS IN, style_designator: CIRCULAR.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-371-8659, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
569-4903-1191502ALT1PC36
NSN: 5330-00-371-8659
FSC: 5330 — Packing and Gasket Materials
CAGE: 80064 — NAVAL SHIP SYSTEMS COMMAND (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
minor_width0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
constructionSOLID
minor_height0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
special_features0.062 IN. RADIUS ON CORNERS IN
style_designatorCIRCULAR
aperture_diameter3.4375 INCHES MINIMUM AND 3.4377 INCHES MAXIMUM IN
fabrication_methodSOLID
protuberance_angle45.0 DEGREES NOMINAL
protuberance_width0.1084 INCHES MINIMUM AND 0.1104 INCHES MAXIMUM IN
cross-sectional_width0.304 INCHES NOMINAL IN
cross-sectional_height0.320 INCHES NOMINAL IN
NSN5330-00-371-8659
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 569-4903-1191502ALT1PC36 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.320 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.304 INCHES NOMINAL IN
•
PROTUBERANCE WIDTH: 0.1084 INCHES MINIMUM AND 0.1104 INCHES MAXIMUM IN
•
MINOR HEIGHT: 0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
PROTUBERANCE ANGLE: 45.0 DEGREES NOMINAL
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.320 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.304 INCHES NOMINAL IN
PROTUBERANCE WIDTH0.1084 INCHES MINIMUM AND 0.1104 INCHES MAXIMUM IN
MINOR HEIGHT0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PROTUBERANCE ANGLE45.0 DEGREES NOMINAL
CROSS-SECTIONAL SHAPE STYLESPECIAL
APERTURE DIAMETER3.4375 INCHES MINIMUM AND 3.4377 INCHES MAXIMUM IN
MINOR WIDTH0.249 INCHES MINIMUM AND 0.251 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
569-4801-1191528PC11Reference document
Same NSN cross-reference
Reference document — Secondary reference
572-4801-1415507REVAPC11Reference document
Same NSN cross-reference
Reference document — Secondary reference
569-4801-1191474ALT1PC21Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 569-4903-1191502ALT1PC36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 569-4903-1191502ALT1PC36?
569-4903-1191502ALT1PC36 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 569-4903-1191502ALT1PC36?
There are 3 known substitutes for 569-4903-1191502ALT1PC36: 569-4801-1191528PC11, 572-4801-1415507REVAPC11, 569-4801-1191474ALT1PC21. Substitute compatibility should be verified for your specific system.
What is the NSN for 569-4903-1191502ALT1PC36?
569-4903-1191502ALT1PC36 is cataloged in the U.S. Government catalog under NSN 5330-00-371-8659. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 569-4903-1191502ALT1PC36