PartsTable
Technical Data Sheet
Download PDF

5685K35 — MAGNET,PERMANENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5685K35: MAGNET,PERMANENT.

The MAGNET,PERMANENT is a the manufacturer industrial component. Key specifications include shape: DISK, overall_height: 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN, overall_diameter: 4.84325 INCHES MINIMUM AND 4.96925 INCHES MAXIMUM IN, special_features: MAXIMUM PULL 190.0 POUNDS LBS, surface_treatment: ZINC, mounting_configuration: 0.5 INCH CENTER HOLE IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-680-4275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5685K35
NSN: 5340-01-680-4275
FSC: 5340 — Hardware, Commercial
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
shapeDISK
overall_height0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
overall_diameter4.84325 INCHES MINIMUM AND 4.96925 INCHES MAXIMUM IN
special_featuresMAXIMUM PULL 190.0 POUNDS LBS
surface_treatmentZINC
mounting_configuration0.5 INCH CENTER HOLE IN
end_item_identification015604409
part_name_assigned_by_controlling_agencySTEEL-ENCASED MAGNETIC DISC WITH MOUNTING HOLE
NSN5340-01-680-4275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5685K35 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 4.84325 INCHES MINIMUM AND 4.96925 INCHES MAXIMUM IN
•
SHAPE: DISK
•
SURFACE TREATMENT: ZINC
•
MOUNTING CONFIGURATION: 0.5 INCH CENTER HOLE IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
OVERALL DIAMETER4.84325 INCHES MINIMUM AND 4.96925 INCHES MAXIMUM IN
SHAPEDISK
SPECIAL FEATURESMAXIMUM PULL 190.0 POUNDS LBS
SURFACE TREATMENTZINC
MOUNTING CONFIGURATION0.5 INCH CENTER HOLE IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSTEEL-ENCASED MAGNETIC DISC WITH MOUNTING HOLE
END ITEM IDENTIFICATION015604409
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5685K35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5685K35?
5685K35 is a MAGNET,PERMANENT.
What is the NSN for 5685K35?
5685K35 is cataloged in the U.S. Government catalog under NSN 5340-01-680-4275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5685K35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.