PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 568527
568527 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,SHOULDER,HEADED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1112 OR STEEL COMP 1114 OVERALL, head_style: FLAT COUNTERSUNK (INCLUDED ANGLE LESS THAN 135 DEG), first_end_style: CHAMFERED, style_designator: SHOULDER, first_step_length: 0.938 INCHES NOMINAL IN, pin_head_diameter: 0.713 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
568527
NSN: 5315-00-276-4088
FSC: 5315
CAGE: 12204 — CHRYSLER REALTY COMPANY LLC DBA DAIMLER CHRYSLER (USA)
SPECIFICATIONS
materialSTEEL COMP 1112 OR STEEL COMP 1114 OVERALL
head_styleFLAT COUNTERSUNK (INCLUDED ANGLE LESS THAN 135 DEG)
first_end_styleCHAMFERED
style_designatorSHOULDER
first_step_length0.938 INCHES NOMINAL IN
pin_head_diameter0.713 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN
under_head_length1.063 INCHES NOMINAL IN
second_step_length0.125 INCHES NOMINAL IN
first_step_diameter0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
second_step_diameter0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.031 INCHES NOMINAL IN
NSN5315-00-276-4088
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 568527 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 0.713 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
STYLE DESIGNATOR: SHOULDER
•
FIRST END STYLE: CHAMFERED
•
FIRST STEP DIAMETER: 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SECOND STEP DIAMETER: 0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.031 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
PIN HEAD DIAMETER0.713 INCHES MINIMUM AND 0.718 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
STYLE DESIGNATORSHOULDER
FIRST END STYLECHAMFERED
FIRST STEP DIAMETER0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SECOND STEP DIAMETER0.480 INCHES MINIMUM AND 0.490 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.031 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
UNDER HEAD LENGTH1.063 INCHES NOMINAL IN
SECOND STEP LENGTH0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2071103Interchangeable
interchangeable cross-reference
interchangeable
209103Interchangeable
interchangeable cross-reference
interchangeable
0209103-1Interchangeable
interchangeable cross-reference
interchangeable
39-171Interchangeable
interchangeable cross-reference
interchangeable
216-34251-1Interchangeable
interchangeable cross-reference
interchangeable
72-6970-005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 568527?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 568527?
568527 is a PIN,SHOULDER,HEADED.
What parts can replace 568527?
There are 24 known substitutes for 568527: 2071103, 209103, 0209103-1 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 568527?
568527 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-276-4088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 568527

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026