PartsTable
Technical Data Sheet
PartsTable / O-RING / 5661-0905
5661-0905 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN, center_hole_diameter: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN, cross-sectional_height: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-263-8029, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5661-0905
NSN: 5331-00-263-8029
FSC: 5331 — O-RING
CAGE: 61423 — KIDDE TECHNOLOGIES, INC DIV KIDDE AEROSPACE AND DEFENSE (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
center_hole_diameter0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
cross-sectional_height0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
NSN5331-00-263-8029
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5661-0905 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.409 INCHES MINIMUM AND 0.419 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.547 INCHES MINIMUM AND 0.569 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.069 INCHES MINIMUM AND 0.075 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
3200-911Interchangeable
interchangeable cross-reference
interchangeable
10132432Interchangeable
interchangeable cross-reference
interchangeable
53578Interchangeable
interchangeable cross-reference
interchangeable
B94.19 TABLE 25Interchangeable
interchangeable cross-reference
interchangeable
1940Interchangeable
interchangeable cross-reference
interchangeable
457-6005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5661-0905?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5661-0905?
5661-0905 is a O-RING.
What parts can replace 5661-0905?
There are 28 known substitutes for 5661-0905: 3200-911, 10132432, 53578 and 25 more. Substitute compatibility should be verified for your specific system.
Is 5661-0905 still available?
5661-0905 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5661-0905

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026