PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 565CR
565CR ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include bore_shape: STRAIGHT, bore_diameter: 7.1875 INCHES NOMINAL IN, overall_width: 0.5630 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: UNGROUND, special_features: HIGH TEMP GREASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-929-0538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
565CR
NSN: 3110-00-929-0538
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
bore_shapeSTRAIGHT
bore_diameter7.1875 INCHES NOMINAL IN
overall_width0.5630 INCHES NOMINAL IN
load_directionRADIAL
surface_finishUNGROUND
special_featuresHIGH TEMP GREASE
overall_outside_diameter8.5000 INCHES NOMINAL IN
internal_fit-up_designationSTANDARD
retainer_fabrication_methodMACHINED
NSN3110-00-929-0538
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 565CR · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: MACHINED
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
BORE DIAMETER: 7.1875 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 8.5000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
RETAINER FABRICATION METHODMACHINED
LOAD DIRECTIONRADIAL
SPECIAL FEATURESHIGH TEMP GREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
OVERALL WIDTH0.5630 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
BORE DIAMETER7.1875 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER8.5000 INCHES NOMINAL IN
SURFACE FINISHUNGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
16930Interchangeable
interchangeable cross-reference
interchangeable
7864CInterchangeable
interchangeable cross-reference
interchangeable
183-905Interchangeable
interchangeable cross-reference
interchangeable
673-0465-00Interchangeable
interchangeable cross-reference
interchangeable
V7011Interchangeable
interchangeable cross-reference
interchangeable
02.111.551Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 565CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 565CR?
565CR is a BEARING,BALL,ANNULAR.
What parts can replace 565CR?
There are 7 known substitutes for 565CR: 16930, 7864C, 183-905 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 565CR?
565CR is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-929-0538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 565CR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026