PartsTable
Technical Data Sheet
Download PDF

56596 — RESISTOR,VARIABLE,WIRE WOUND,NON

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

56596: RESISTOR,VARIABLE,WIRE WOUND,NON.

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL, body_length: 0.422 INCHES NOMINAL IN, design_type: FRICTION, actuator_type: FLUSH DRIVE WITH SLOT-HOLE, body_diameter: 0.775 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-071-3830, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 56596
NSN: 5340-00-071-3830
NIINs: 000713830, 001071875, 004356798, 016893379
FSC: 5340 — Hardware, Commercial
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL
body_length0.422 INCHES NOMINAL IN
design_typeFRICTION
actuator_typeFLUSH DRIVE WITH SLOT-HOLE
body_diameter0.775 INCHES NOMINAL IN
overall_length0.797 INCHES NOMINAL IN
mounting_methodTAB
overall_diameter0.775 INCHES NOMINAL IN
section_quantity1
style_designatorCYLINDRICAL ROLLER, FLAT ENDS
features_providedGROUNDED CONTACT ARM
NSN5340-00-071-3830
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 56596 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.720 INCHES NOMINAL IN
•
MATERIAL: PLASTIC
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.720 INCHES NOMINAL IN
MATERIALPLASTIC
SUBSTITUTES & CROSS-REFERENCES 8
TMA-38-NSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
A0009217Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
909734209Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1918-121150-045Reference document
Same NSN cross-reference
Reference document — Secondary reference
10608650-4Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
10078605Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 56596?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 56596?
56596 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 56596?
There are 8 known substitutes for 56596: TMA-38-N, A0009217, 909734209 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 56596?
56596 is cataloged in the U.S. Government catalog under NSN 5340-00-071-3830. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 56596