PartsTable
Technical Data Sheet
Download PDF

5655-X-37 — HANDLE,DOOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

5655-X-37: HANDLE,DOOR.

The HANDLE,DOOR is a the manufacturer industrial component. Key specifications include shaft_length: 2.50 INCHES NOMINAL IN, overall_length: 8.79 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S), square_shaft_width: 0.63 INCHES NOMINAL IN, integral_shaft_style: SQUARE, end_item_identification: 4910-01-539-6129. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-628-3186, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5655-X-37
NSN: 5340-01-628-3186
FSC: 5340 — Hardware, Commercial
CAGE: 19220 — EASTERN CO DIV EBERHARD MANUFACTURING (USA)
SPECIFICATIONS
shaft_length2.50 INCHES NOMINAL IN
overall_length8.79 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
style_designatorU
square_shaft_width0.63 INCHES NOMINAL IN
integral_shaft_styleSQUARE
end_item_identification4910-01-539-6129
mounting_facility_diameter0.22 INCHES NOMINAL IN
mounting_facility_quantity3
part_name_assigned_by_controlling_agencyPADLOCK TYPE DROP HANDLE ASSEMBLY
center_to_center_distance_between_mounting_facilities_parallel_to_length1.50 INCHES NOMINAL IN
NSN5340-01-628-3186
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 5655-X-37 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING FACILITY DIAMETER: 0.22 INCHES NOMINAL IN
•
INTEGRAL SHAFT STYLE: SQUARE
•
MOUNTING FACILITY QUANTITY: 3
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.50 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: U
•
SHAFT LENGTH: 2.50 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING FACILITY DIAMETER0.22 INCHES NOMINAL IN
INTEGRAL SHAFT STYLESQUARE
MOUNTING FACILITY QUANTITY3
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.50 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
STYLE DESIGNATORU
OVERALL LENGTH8.79 INCHES NOMINAL IN
SHAFT LENGTH2.50 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPADLOCK TYPE DROP HANDLE ASSEMBLY
END ITEM IDENTIFICATION4910-01-539-6129
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
06A8124135Reference document
Same NSN cross-reference
Reference document — Secondary reference
40-5655-XReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 5655-X-37?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5655-X-37?
5655-X-37 is a HANDLE,DOOR.
What parts can replace 5655-X-37?
There are 2 known substitutes for 5655-X-37: 06A8124135, 40-5655-X. Substitute compatibility should be verified for your specific system.
What is the NSN for 5655-X-37?
5655-X-37 is cataloged in the U.S. Government catalog under NSN 5340-01-628-3186. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5655-X-37

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.