PartsTable
Technical Data Sheet
564877 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG ASSEMBLY,SEALING is a the manufacturer industrial component. Key specifications include material: RUBBER AND STEEL, design_type: FRICTION, tube_outside_diameter_for_which_designed: 0.937 INCHES NOMINAL IN, opening_inside_diameter_for_which_designed: 1.25 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-018-2880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
564877
NSN: 5340-00-018-2880
FSC: 5340
CAGE: 40152 — VME AMERICAS INC SUB OF VME GROUP N V (USA)
SPECIFICATIONS
materialRUBBER AND STEEL
design_typeFRICTION
tube_outside_diameter_for_which_designed0.937 INCHES NOMINAL IN
opening_inside_diameter_for_which_designed1.25 INCHES NOMINAL IN
NSN5340-00-018-2880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 564877 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER AND STEEL
OPENING INSIDE DIAMETER FOR WHICH DESIGNED: 1.25 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.937 INCHES NOMINAL IN
DESIGN TYPE: FRICTION
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER AND STEEL
OPENING INSIDE DIAMETER FOR WHICH DESIGNED1.25 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.937 INCHES NOMINAL IN
DESIGN TYPEFRICTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
52001Upgraded Successor
successor cross-reference
successor
52007Upgraded Successor
successor cross-reference
successor
26M02-7006 ITEM 23Upgraded Successor
successor cross-reference
successor
51863Interchangeable
interchangeable cross-reference
interchangeable
R26343Interchangeable
interchangeable cross-reference
interchangeable
R1885SNInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 564877?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 564877?
564877 is a PLUG ASSEMBLY,SEALING.
What parts can replace 564877?
There are 20 known substitutes for 564877: 52001, 52007, 26M02-7006 ITEM 23 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 564877?
564877 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-018-2880. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 564877