PartsTable
Technical Data Sheet
Download PDF

563A458P1 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

563A458P1: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, diameter: 0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN, material: STEEL COMP 440C OVERALL, head_style: FLAT, chamfer_length: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN, hardness_rating: 50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-720-8919, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
563A458P1
NSN: 5315-00-720-8919
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 24446 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
height0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
diameter0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN
materialSTEEL COMP 440C OVERALL
head_styleFLAT
chamfer_length0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
hardness_rating50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
style_designatorSTRAIGHT
pin_chamfer_angle10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
pin_head_diameter0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.710 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
first_hole_diameter0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
NSN5315-00-720-8919
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 563A458P1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 0.710 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
•
HARDNESS RATING: 50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH0.710 INCHES MINIMUM AND 0.720 INCHES MAXIMUM IN
PIN CHAMFER ANGLE10.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.050 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
HARDNESS RATING50.0 ROCKWELL C MINIMUM AND 60.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.1251 INCHES MINIMUM AND 0.1253 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 563A458P1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 563A458P1?
563A458P1 is a PIN,STRAIGHT,HEADED.
What is the NSN for 563A458P1?
563A458P1 is cataloged in the U.S. Government catalog under NSN 5315-00-720-8919. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 563A458P1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.